Casement Door
Features:
- Variety of design available
- RAL standards high quality pure polyester powder coating paints
- Energy efficient door with Single or Double glass unit.
- Easy to open and close with one point or multipoint locking arrangement.
- Double sealing with EPDM gaskets for enhanced thermal and sound insulation and a barrier against dust and pollution.
- Opens outside or inside: both options available.
- Thermal break system also an option which provides acoustic as well as thermal insulation
- Option of Wiremesh available
- High quality hardware does not rust despite sustained exposure to the elements.
- Friction hinges stay open at any angle in the face of high-speed winds. No door stoppers required.
- Wind resistance in high-rise buildings
- Best option for humid climate
- Good ventilation and provide attractive contemporary look
- No maintenance cost

AGV CASEMENT SERIES DETAIL
S No. |
DESCRIPTION |
SERIES |
GLASS |
ACCESSORIES |
CD-01 |
Pattam Section | AGV 2137 SW | Single Glass | Handles, Hinges,Wire Mesh,EPDM Gaskets |
CD-02 |
Pattam Section | AGV 2137 DW | Double Glass | Handles, Hinges,Wire Mesh,EPDM Gaskets |
CD-03 |
Casement Door | AGV 2100 S | Single Glass | Handles, Hinges, EPDM Gaskets |
CD-04 |
Casement Door With Insulation | AGV 2100 D | Double Glass | Handles, Hinges, EPDM Gaskets |
PD-01 |
Aluminium Hinge Door | AGV H-2448 S | Single Glass | Handle,Hinges, EPDM Gaskets |
PD-02 |
Aluminium Floor Spring Door | AGV F-2448 S | Single Glass | Handle, Floor Machine, EPDM Gaskets |
PD-03 |
Aluminium Hinge Door | AGV H-2485 S | Single Glass | Handle,Hinges, EPDM Gaskets |
PD-04 |
Aluminium Floor Spring Door | AGV F- 2485 S | Single Glass | Handle, Floor Machine, EPDM Gaskets |
PD-05 |
Aluminium Floor Spring Door | AGV F- 2485 D | Double Glass | Handle, Floor Machine, EPDM Gaskets |
PD-06 |
Flush Door | AGV 2065 | Partical Board/Glass | Handles, Hinges, EPDM Gaskets |
PD-07 |
Flush Door | AGV 2101 | Partical Board | Handles, Hinges, EPDM Gaskets |
PD-08 |
Flush Door | AGV 2101 G | Partical Board | Handles, Hinges, EPDM Gaskets |
|
||||
|
||||
|
||||
Legends | Series Legends | |||
|
S- Single Glass | 1000 – Casement Series | F- Floor Machine Door | |
|
D- Double Glass | 2000 – Door Series | H- Hinge Door | |
|
T- Thermal Break | 3000 – Sliding Window Series | ||
|
W – Wire Mesh | 4000 - Sliding Door Series |
Aluminuim Sliding Door
Sliding Doors are becoming increasingly popular because they are easy to operate and do not occupy space either on the interior or on the exterior.
There are several series ranging from two-track to four-track. Sliding Doors can be installed in multi-panel, by-pass or pocket configurations. Corner configurations that transform indoor living spaces into unique indoor / outdoor areas are also available.

Features:
S No. |
DESCRIPTION |
SERIES |
GLASS |
ACCESSORIES |
SD-01 |
Sliding Door | AGV 4083 SW | Single Glass | Handle cum lock, Rollers, EPDM Gaskets |
SD-02 |
Sliding Door | AGV 4083 DW | Double Glass | Handle cum lock, Rollers, EPDM Gaskets |
SD-03 |
Thermal Break Sliding Door | AGV 4083 TW | Double Glass | Handle cum lock, Rollers, EPDM Gaskets |
Legends |
Series Legends | |||
S- Single Glass | 1000 – Casement Series | |||
D- Double Glass | 2000 – Door Series | |||
T- Thermal Break | 3000 – Sliding Window Series | |||
W – Wire Mesh | 4000 - Sliding Door Series |
Aluminuim Flush Door
AGV ALUMINIUM Flush DOOR with frame using shutter panel of 25 mm thick prelaminated particle board exterior grade, one side decorative and other balancing white & edges sealed with water resistant paint. Aluminium U-type edge beading 35 x 25 mm ,fixed on three side around the shutter and overlapping rebate type U-edge beading on vertical one side 35 x 40 mm,. Heavy aluminium hinges 100 x 74 mm fixed by inserting through a slit in U-beading and frame. Door FRAME / chokhat with built in rebate box section 63.5 x 38 mm with EPDM rubber gasket and frame fixed in position with steel screws and rawl plugs. All visible steel screws shall be rust resistant galvanised and coloured as approved. Aluminium sections of M/S AGV Fenestration Pvt ltd. as per drawing and conforming to Grade 63400 WP alloy as per IS: 733 and IS: 1285 and Powder coated with min 50 microns in approved color.

Testimonials
I have know Puneet Sharma for over Five year and proud to have sponsored him to this chapter. We have been using AGV Alfab Aluminum glazing and window in most of our prestigious project all over the country... Read More ”Nilanjan Bhowal
CEO Design Consortium
“ I Nikhil Gupta Director at AMBE Group, India’s leading wheat flour manufacturer, would like to give my testimonial to Puneet Sharma, director of AGV Alfab Ltd, manufacture of premium residential... Read More”Nikhil Gupta
Director at AMBE Group
I jaspreet singh into risk protection and protection counseling would like to be place on record my sincere appreciation for “Puneet Sharma” of “AGV Alfab”
This is what TYNOR director PG Singh with me Tere Bina “... Read Morejaspreet singh
Business Owner